38CNC Fully automatic hydraulic pipe bending machine

The 38CNC Fully automatic hydraulic pipe bending machine is a new type of pipe bending tool with the function of bending pipe and the function of lifting. It has many advantages such as reasonable structure, safe use, convenient operation, reasonable price, fast loading and unloading, easy to carry, and multi-purpose.

It has a large share in the domestic market of hydraulic pipe bending machine, mainly used in factories, warehouses, docks, buildings, Installation of pipelines and repairs for railways, automobiles, etc.

And it can also remove the elbow component (cylinder) as a separate hydraulic topping machine.

Based on the features of The 38CNC Fully automatic hydraulic pipe bending machine, we design the machine for your reference:

Technical parameters:

1.This model is an economical automatic three-dimensional CNC pipe bending machine, which can automatically bend, automatically feed, and automatically tilt the angle. The three-dimensional pipe fittings can be automatically bent at one time. The feeding and tilting are servo motors. The elbow shaft is controlled by the oil pressure value, and the auxiliary push is adjusted by the regulating valve.

2.Both the feeding and tilting axes can be set by the computer according to the actual work piece condition. The elbow shaft adjusts the matching speed through a pressure regulating valve.

3.The electronic control system adopts well-known brand controllers and super large PLC with strong performance and good stability.

4.Equipped with 10.4′′color touch screen, man-machine dialogue operation, easy to understand. All elbow data can be input through touch screen.

5.The screen display text is available in both Chinese and English, which can be switched. If you need other countries, the text can be ordered.

6.Each tube can be set to 32 bends (or selected by the user), and the memory capacity can store 330 sets (or 125 sets) of bend data.

7.After the data editing is completed, there is a key lock function to prevent the data from being modified arbitrarily.

8.With power-off memory function, data can be saved permanently.

9.Manual, semi-automatic, fully automatic operation mode can be set. Manual decomposing can be used during the trial to observe the interference point and modify the action.

10.Each bend can be set to feed, bend, and rotate the three axes to move or move differently to avoid interference points, thus improving production efficiency. There are eight ways to choose from: 1 feeding → retreating → tilting; 2 (feeding + reversing) → tilting; 3 (feeding + reversing + tilting); 4 feeding → tilting → reversing; 5 ( Feeding + tilting → returning; 6 retreating → feeding → tilting; 7 tilting → retreating → feeding; 8 retreating → (feeding + tilting).

11.Each bend can set the bounce compensation value and the demolding gap due to the change of the material.

12.There are two kinds of feeding methods: direct feeding and pinching. When the core is not worn, the pinning method can be used, and the feeding can be repeated, and the length of the work piece is not limited.

13.The setting of the waiting position, safety position, wheel mode interference position, and guide mode interference position can be fine-tuned. The computer has an automatic memory position function to eliminate the occurrence of human measurement errors and machine collisions, and there are front and rear limits. The shutdown function is a double safety insurance.

14.When the direct feed mode is selected, the function of measuring the bending and extension ratio of the pipe fittings is convenient, and the actual material consumption length of the pipe fittings is conveniently calculated.

15.There is a counting function for the work piece.

16.There are two-axis simultaneous zero function, just press the button. It is not necessary to return the two axes to zero, which saves time and accuracy.

17.There is an automatic detection error or machine failure function, and it is displayed on the screen for easy operator elimination.

No.	Name		Parameters	Remarks
1	Maximum bending diameter		Φ38×3mm
2	Maximum bending radius		R160mm	customize
3	Minimum bending radius		According to pipe diameter
4	Maximum feed length		3000	customize
5	Feeding method		1.Direct delivery	Optional
			2.Clip delivery
6	Maximum bending angle		190
7	Using controller		PLC + Industrial computer
8	The number of bends per pipe can be set		16	Expandable
9	Working speed	Bending speed	200	Adjustable
		Tubing speed	200	Adjustable
		Feeding speed	1000	Adjustable
		10	Precision	Feeding accuracy	±0.1
				Duct accuracy	±0.1
11	Rotary servo motor power		400	Mitsubishi
12	Feed servo motor power		1000	Mitsubishi
13	Data input method		1, coordinate values (X, Y, Z)	Optional
			2. Working value (Y, B, C)
14	Hydraulic motor horsepower		4.0
15	greatest pressure		12	Adjustable
16	Hydraulic system control		Electromagnetic reversing valve
17	Fuel tank capacity		150
18	Machine SIZE		402×66×150

More machine pictures of 38CNC Fully automatic hydraulic pipe bending machine:

FAQ:

1.Do you have after sales support?

Yes, we are happy to give advice and we also send skilled technicians to your place to support the technical guidance. We will let your machines running that in order to keep your business running.

2.What can you do if the machine broken?

Our machine’s warranty period is 12months. And if the broken parts can’t be repaired, we will send the new one to replace the broken parts. And the only thing you need to do is paying the transport costs.

If beyond the warranty period, we can through the negotiation to solve the problems, and we will supply the technical support for the whole life of the machine.

Looking for ideal The 38CNC Fully automatic hydraulic pipe bending machine manufacturer & supplier ? We have a wide selection at great prices to help you get the target product. If you have any question, please contact us.

 

Pearl Xu

Tel：+8618733770188

whatsApp/Wechat:+86-a18733770188

Email:cnzt010@zhongtuocn.com